WOLFBOX USB C Hardwire Kit for Dash Cameras with Battery Drain Protection

Wide Capacity

• 3m hardwire kit for dash cam or other device powered by Type-C port
• 5V/3A steady output
• Voltage input supports from 12V-24V

High Compatibility

• The OBD step-down line can supply power to most car electronics
• Plug and play without damaging any car circuits
• Anti-interference does not affect the normal operation of other devices

Installation Location

• Most common location of the car OBD interface for the driver is the lower left of the trim panel under the steering wheel
• Location of the OBD may vary depending on origin and model year of the vehicle
• Some locations include above the accelerator pedal or near the driver's side fuse box
• Choose the most suitable location for installation

Connect and Setup

• Connect the OBD hardwire kit to the vehicle OBD interface
• Connect the Type-C USB to the dash cam
• Start the car and turn on the dash cam
• Set the parking monitor mode

Low Voltage Protect

• Multiple Security Protection with low voltage protection
• When the car is turned off the voltage below 13V recording will continue within 5 minutes
• Power will be turned off after 5 minutes