LEKATO 58GHz Wireless Microphone Transmitter Receiver XLR System

The LEKATO MW-1 is a 5.8GHz wireless microphone system designed for dynamic microphones. It includes a plug-on rechargeable wireless transmitter and receiver suitable for various audio applications.

• MW-01 Receiver Specifications:
  • Power supply mode: built-in lithium battery
  • Cell capacity: 3.7V 400mAh
  • Reception sensitivity: -85dBm
  • Received frequency: 5.8GHz frequency
  • Anti-jamming method: frequency hopping
  • Signal distortion: <0.02%
  • Gain: 0 dB
  • SNR: 105dB
  • Frequency response: 20Hz - 20KHz
  • Delay time: <5ms
  • Sampling rate: 24-bit / 48KHz
  • Output impedance: 6800
  • Port type: XLR male port

Transmitter and Receiver Pairing:

• The default setting for the MW-1 microphone wireless system is Channel 1
• If you want to use other channels, follow these steps:
  1. Turn on the receiver and the transmitter
  2. Connect the receiver to the microphone and the transmitter to the mixer or other equipment
  3. Long press the channel switch button to pair the channels of the receiver and the transmitter; the signal is paired when the status indicator flickers blue
  4. When paired successfully, the status indicators on both the transmitter and receiver become blue

Battery Charging:

• You can check the receiver and transmitter's battery level upon powering on the unit
• The status indicator flickering red indicates low battery and needs charging
• While charging, the status indicator is red and goes off when fully charged
• Attention: You can charge the transmitter and receiver simultaneously using the Dual Port USB Cable

Package List:

• 1 * Wireless microphone system MW-1 Receiver
• 1 * Wireless microphone system MW-1 Transmitter
• 1 * Rechargeable Power Cable